For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers:

  1. M. Farzin, M. Shariati, "Analysis of axisymmetric and non-axisymmetric stretching of sheet metal by the FEM", Esteghlal Journal, Vol. 14, No. 1, Sep. 1995 (In Persian).
  2. M. Farzin, "Prediction of geometry and strain distribution during cold roll forming of symmetrical channel sections", Iranian Journal of Mechanical Engineering, Vol. 9, No. 3, Fall 1998.
  3. M. Farzin, M. Tajdari, "Stress analysis and energy estimation in cold roll forming process", Esteghlal Journal, Vol. 18, No. 1, Sep. 1999, pp. 143-160 (In Persian).
  4. H. Hashemolhosseini, M. Foroutan, M. Farzin, "Prediction of instability in planar anisotropic sheet metal forming processes", International Journal of Engineering, Feb. 2001, Vol .14, No.1, PP. 69-80.
  5. M. Foroutan, M. Farzin, H. Hashemolhosseini, "Analysis of planar anisotropic sheet metal forming processes by the F.E.M. ", Journal of Science and Tech. (Scientia Iranica), Vol. 8, No. 2, pp 138-144, April 2001.
  6. H. Hashemolhosseini, N. Sadati, M. Farzin, "A new class of Cn interpolations and its applications to F.E.M." International Journal for Numerical Method in Engineering , 2002, 53:1781-1800 (DOI: 10.1002/nme.358).
  7. H. Hashemolhosseini, H. Dalayeli, M. Farzin, “Correction of hydrostatic pressure obtained by the finite element flow formulation using moving least square method”, Journal of Materials Processing Technology, 125-126 (2002), 588-593.
  8. M. Farzin, M. Salmani Tehrani, E. Shameli, “Determination of bucking limit of strain in cold roll forming by the finite element analysis”, Journal of Materials Processing Technology, 5971, Vol. 125-126 (2002) , pp 626-633.
  9. M. Tajdari, M. Farzin, Numerical analysis of cold roll forming of symmetrical open sections, Journal of Materials Processing Technology, 125-126 (2002) 633-637.
  10. H. Dalayeli, H. Hashemolhosseini, M. Farzin, B. Soltani, “Improvement of flow formulation by recovery of hydrostatic pressure using the finite point method”, International Journal for Numerical Methods in Engineering, (2006), 65: 1403-1418.
  11. M. Farzin, H. Javani, M. Mashayekhi, R. Hambli "Analysis of blanking process  using various damage criteria", Journal of Materials Processing Technology, Vol. 177 (2006) , 287-290.
  12. M. Sohankar, M. Farzin, Analysis of pressure distribution and optimization of working conditions during push bending of circular tubes, JAST, Iranian Aerospace Society, Vol. 4, No.3, pp45-51, Sept 2007.
  13.  Simulation of four-rolls thin plate bending process, Modarres Technical & Engineering, Vol 1, No. 28, 2007.
  14. M. Farzin, H. Montazerolghaem, "Manufacture of thin miniature parts using electro hydraulic forming and viscous pressure forming methods", Accepted by Journal of Archives of Metallurgy and Materials, to be published in volume 54, issue 3/2009.
  15. M. Farzin, F. Ahmadi, “Finite element simulation of induction bending of large diameter pipes with a small bending radius”, Journal of Steel research international, 79, (2008), Vol. 1, pp. 179-185.
  16. M. Farzin, F. Haji Aboutalebi, H. Khademyzadeh, "Comparison of rupture modes in deep drawing and hydro-mechanical deep drawing processes using ductile damage model", Journal of Steel research international, 79, (2008), Vol. 1, pp. 340-347.
  17. F. Ahmadi, M. Farzin, "Investigating geometric and friction conditions causing chevron cracks creation in wire drawing process using FEM", Journal of Steel research international, 79, (2008), Vol. 2, pp. 382-388.
  18. F. Ahmadi, M. Farzin, "Prediction of spring-back of tube induction bending process by FE method and comparison with analytical results", Journal of Steel research international, 79, (2008), Vol. 1, pp. 201-208.
  19. M. Loh-Mousavi, M. Bakhshi, K. Mori, T. Maeno, M. Farzin, S.J. Hossinipour, 3-D Finite element simulation of pulsating free bulge hydro-forming of tubes, Iranian J. of Science &Technology, Transaction B, Engineering, Vol. 32, No, B6, pp611-618.
  20. A. Ghassemi, A. Shahidi and M. Farzin, A new method for analyzing large elasto-plastic deformation of a thin Cosserat shell, Proc. IMechE Vol. 224 Part C: J. Mechanical Engineering Science, The manuscript was received on 26 August 2009 and was accepted after revision for publication on 15 January 2010.
  21. A. Ghassemi, A. Shahidi and M. Farzin A New Element For Analyzing Large Deformation Of Thin Naghdi Shell Model:  part1 : elastic, accepted by the Applied Mathematical Modelling, Ref. No.:  amm 7728R1.
  22. M. Loh-Mousavi, M. Bakhshi, K. Mori, T. Maeno, M. Farzin, S.J. Hossinipour Mechanism of Improvement of Die Corner Filling in Pulsating Hydroforming of Tube in Box-Shape Die, Modarres Technical & Engineering, Vol 1, No. 37, Fall 2010.
  23. F. Haji Aboutalebi, M. Farzin, M. Porsina, Numerical Simulation and Experimental Validation of a Ductile Damage Model for DIN 1623 St14 Steel, Accepted by the International Journal of Advanced Manufacturing Tech., Manuscript #IJAMT4301R5, 2010, (2011) 53:157–165, DOI 10.1007/s00170-010-2831-z
  24. H. Montazerolghaem, M. Farzin, A. Fadaei Tehrani, Manufacture of Miniature Bulge Test Apparatus Suitable for Micro-Sheet Metal Forming, Journal of Steel research international, 81, (2010), No. 9, pp. 1213-1216
  25. S. Mirian1, M. Safavi1, A. Fadaei, M. Salimi, M. Farzin, Improving the Quality of Surface in Polishing Process with the Magnetic Abrasive Powder Polishing (MAPP) by Use of Ultrasonic Oscillation of Work-piece on a CNC Table, International Journal of  Precision Engineering, Vol. 12, No. 2, pp. 275-284,  April 2011, 
  26. Reza Jafari Nedoushan Mahmoud Farzin, Effect of Hydrostatic Pressure on Nano Crystalline Materials Behavior, Journal of Nano Research Vols. 18-19 (2012) pp 27-42, Online available since 2012/Jul/26 at www.scientific.net, © (2012) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/JNanoR.18-19.27, 26331
  27. R. Jafari Nedoushan and M. Farzin,  Effects of Unbalanced Forces on Product Thickness Accuracy in Multi-rollers Flow-Forming, Mechanics of Aerospace, Vol. 7, No2, pp 33-44, Accepted: 21 May, Published: 2011 21 June 2011, 26336,   مجله مكانيك هوافضا (ساخت و توليد)، جلد 7، شماره 2, 1390 ، صفحات 33 الي  44و
  28. A. R. Fallahi Arezoodar, H. Ebrahimi Haratmeh1,M. Farzin, Numerical and Experimental Investigation of Inward Tube Electromagnetic forming- Electromagnetic Study, Advanced Materials Research Vols. 383-390 (2012) pp 6710-6716, Online available since 2011/Nov/22 at www.scientific.net

 (2012) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/ AMR.383-390.6710

  1. Mehdi Safari, M. Farzin, Experimental and numerical investigation of laser bending of tailor machined blanks, Optics& Laser Technology, Accepted 25 November 2012, 48 (2013) pp 513–522, 26345.
  2. Behnaz Ebadian, M. Farzin, Saeid Talebi, Niloufar Khodaeian, Evaluation of stress distribution of implant retained mandibular overdenture with different vertical restorative spaces: A finite element analysis, Dental Research Journal / November 2012 / Vol 9 / Issue 6, pp 741-747- 26352
  3. P. Daryabor, M. Farzin, F. Homnarvar, Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM, Modares Mechanical Engineering, April 2013, Vol 13, No 1, pp 95-106, 26353
  4.  M.A. Rasoli, A. Abdullahb, M. Farzin, A. Fadaei Tehrani, A. Taherizadeh Influence of ultrasonic vibrations on tube spinning process, Journal of Materials Processing Technology, 212 (2012) pp 1443– 1452, 23321
  5. R. Jafari Nedoushan and M. Farzin, M. Mashayekhi, A micro-structural model for prediction of void initiation in superplastic forming, International Journal of Damage Mechanics, 26 March 2013, pp 1-15,  
  6. M Mashayekhi, A Taghipour, A Askari and M Farzin, Continuum damage mechanics application in low-cycle thermal fatigue, International Journal of Damage Mechanics, 22 (2), 2012, pp 285-300,  23616.
  7. F. Haji Aboutalebi, M. Farzin,  M. Mashayekhi,  Numerical Simulation and Experimental Validation of a Ductile Damage Evolution In Sheet Metal Forming Processes, Acta Mechanica Solida Sinica, Vol. 25, No. 6, December, 2012, ISSN 0894-9166,
  8. پژمان دريابر، محمود فرزين و سعيده كوهستاني -شبيه سازي تست غير مخرب اولتراسونيك با پروب موج عمودي در اتصال بين ورق كامپوزيت و آلومينيوم توسط اجزاي محدود- مجله مدل سازي در مهندسي -سال نهم، شماره 26 ، پاييز 1390- . 26588
  9.  M. Gandomkar*, S. H. Dibajian, M. Farzin, S. H. Hashemolhoseini, An integration procedure for meshless methods using Kriging interpolations, Indian Journal of Science and Technology, Vol: 6 Issue: 1 January 2013 ISSN:0974-6846

Conference Papers:

  1. M. Farzin, "Blank Holder-less Deep Drawing", International Conference on Engineering Application of Mechanics, pp. 507-513, Jun. 9-12, 1992, Sharif University of Tech., Tehran, Iran.
  2. M. Farzin, "Sheet Metal Forming by a Pressure Medium", International Conference on Engineering Application of Mechanics, pp. 507-513, Jun. 9-12, 1992, Sharif University of Technology, Tehran, Iran.
  3. B. Soltani, M. Farzin, "Analysis of Ring Compression Test by the FEM", International Congress on Computational Methods in Engineering, May 2-6, 1993, Shiraz University, Shiraz, Iran.
  4. M. Farzin, "Fine Blanking Dies", Production and Manufacturing Engineering Conference (PMEC), Oct. 13-14, 1993, Amirkabir Univ. (Tehran Polytechnic), Tehran, Iran.
  5. H. Moslemi, H. Sadeghi, M. Farzin, "Automatic Roll Design for Cold Roll Forming of Tube Sections by Down Hill Method", Engineering Application of Mechanics, May 2-6, 1994, Sharif University of Tech., Tehran, Iran.
  6. M. Shariati, M. Farzin, "Analysis of 3D Sheet Metal Stretching by the FEM", 3rd Annual ASME Conference, May 14-16, 1995, Amirkabir Univ. (Tehran Polytechnic), Tehran, Iran.
  7. M. Farzin, M. R. Ashraf, "Effects of Anisotropy and Work Hardening on Wrinkling of Deep Drawn Parts", 3rd Annual ASME Conference, May 14-16, 1995, Amirkabir Univ. (Tehran Polytechnic), Tehran, Iran.
  8. H. Moslemi, H. Sadeghi, M. Farzin, "Simulation of Cold Roll Forming of Tube Sections", 3rd Annual ASME Conference, May 14-16, 1995, Amirkabir Univ. (Tehran Polytechnic), Tehran, Iran.
  9. M. Foroutan, M. Farzin, "Strain Measurement of Deformed Sheet Metal Parts by Image Processing", 3rd Annual ASME Conference, May 14-16, 1995, Amirkabir Univ. (Tehran Polytechnic), Tehran, Iran.
  10. M. Tajdari, M. Farzin, "Simulation of Cold Roll Forming of Channel Sections", International Symposium of Manufacturing, Sep. 1997, Auckland, Newzeland.
  11. M. Farzin, "Comparison of Die Making Industry of Iran with Industrial Countries", Tehran Research Organization, Dec. 7, 1999.
  12. M. Farzin, M. Foroutan, "Analysis of Planner Anisotropic Sheet Metal Stretching by the FEM", 6th Proceeding of ICTP, Vol. 11, Sep. 9-24, 1999.
  13. M. Tajdari, M. Farzin, "CAD of Rolls for Production of Symmetrical Open Sections by Cold Roll Forming", ICSC, Sep. 1999.
  14. H. Hashemolhosseini, H.Dalayeli, M. Farzin, “Correction of hydrostatic pressure obtained by the finite element flow formulation using moving least square method”, 9th  International Conference on Metal forming, The University of Birmingham, UK, September 9 – 11, 2002.
  15. M. Farzin, M. Salmani Tehrani, E. Shameli, “Determination of bucking limit of strain in cold roll forming by the finite element analysis”, 9th International Conference on Metal forming, The University of Birmingham, UK
    September 9 – 11, 2002.
  16. R. Shivpuri, M. Farzin, “Challenges in Tooling & Process Designs for Next Generation Automotive Parts”, Automotive Tube Hydroforming Conference, May 15-16, 2002, Westin Southfield, Detroit, Michigan, USA.
  17. M. Farzin, R. Shivpuri, " Joining fasteners in the calibration stage of Tube Hydro-forming   (THF) processes", 8th  International Conference on Technology of Plasticity (ICTP), Verona, October 9-13, 2005.
  18. H. Dalayeli, M. Farzin, H. Hashemolhosseini, "Metal Forming Analysis by a Rigid Plastic Meshless Collocation Method",  8th  International Conference on Technology of Plasticity (ICTP), Verona, October 9-13, 2005.
  19. M. Ajoodanian, M. Farzin, M.H. Navidfar, H. Bakhshaei," Design of a 2-D Servo Press Transfer System Using Linear Stepper Actuators", Tehran International Congress on Manufacturing Technologies (TICME2005), December 12-15, 2005.
  20. M. Farzin, H. Javani, M. Mashayekhi, " Investigating the blanking/punching parameters using Gurson and shear criteria", Tehran International Congress on Manufacturing Technologies (TICME2005), December 12-15, 2005.
  21. E. Shahabi, M. Farzin , "Warm Gas-Pressure (WGP) forming of aluminum sheet materials with non-uniform temperature distribution for automotive industry", Tehran International Congress on Manufacturing Technologies (TICME2005), December 12-15, 2005.
  22. M. Bahreini, M. Farzin, " Study of friction effects on tube hydro-forming with outer pressure", 14th annual (International) Conference on Mechanical Engineering, (ISME2006), May16-18, 2006 Isfahan, Iran.
  23. M. Farzin, M. Bahreini, "A new method for the evaluation and ranking of lubricants used in tube hydro-forming processes", 14th annual (International) Conference on Mechanical Engineering, (ISME2006), May16-18, 2006 Isfahan, Iran.
  24. M. Farzin, S. J. Mir Fattah, H. Nemti, S. Miriyan,  "Evaluation of Temperature and Stress Distributions in a Ladle of Molten Copper", 14th annual (International) Conference on Mechanical Engineering, (ISME2006), May16-18, 2006 Isfahan, Iran.
  25. M. Farzin,  S. Miriyan, " Sheet Metal shear forming by CNC Milling Machine and CAD/CAM", 14th annual (International) Conference on Mechanical Engineering, (ISME2006), May16-18, 2006 Isfahan, Iran.
  26. M. Salmani Tehrani, P. Hartley, H. Moslemi Naeini, M. Farzin, "Localised bending Defects in Circular Tube Roll Forming", Proceedings of the 8th ESAFORM Conference on Metal Forming (ESAFORM 2005), 27th -29th April 2005, Cluj-Napoca, Romania.
  27. M. Farzin, H. Javani, M. Mashayekhi, "Analysis of Ductile fracture using Gurson and Shear criteria in blanking processes", 11th International Conference on metal forming, Birmingham, UK, Sept. 11-13 2006.
  28. M. Farzin, e. Shahabi, "Warm gas-forming of aluminum and copper sheets ", TUBEHYDRO 2007 International conference on tube hydroforming, Jun 4- 5, 2007 Harbin, CHINA.
  29. A. Saboktakin , M. Farzin, "Simulation of Cold Forging of Bevel Gear under Various Friction Conditions", International Center for Numerical Methods in Engineering. Barcelona, Spain., COMPLAS 2007,  5-7 September, 2007-10-27.
  30. M. Khalilian, M. Farzin and M. Bakhshi-Jooybari, "Calculation of Upsetting Limit using Lemaitre Coupled Damage Model", Tehran International Congress on Manufacturing Technologies (TICME2007), December 10-13, 2007.
  31. F. Ahmadi , M. Farzin, "Analytical and FEM Investigation to Control pipe Bending Process using Local Induction Heating", Tehran International Congress on Manufacturing Technologies (TICME2007), December 10-13, 2007.
  32. F. Ahmadi , M. Farzin, "Investigation of Pipe Bending with Small Bending Radius using Local Induction Heating by FEM Method", Tehran International Congress on Manufacturing Technologies (TICME2007), December 10-13, 2007.
  33. A.R. Mahdieh najafabadi, B. Mollaei Dariani, M. Farzin,  M. Sohankar, "Manufacturing of exhaust manifold by sheet metal forming process", Tehran International Congress on Manufacturing Technologies (TICME2007), December 10-13, 2007.
  34. M.Farzin, A.R. Majed, F. Ahmadi, "Laser Forming of Sheet Metals: Mechanisms, Experiment and simulation",  Tehran International Congress on Manufacturing Technologies (TICME2007), December 10-13, 2007.
  35. N.Fathianpour, S.H. HashemAlhousainy, M. Farzin, S.H. Dibajian, Modification of weight function in moving least square approximation and its application in meshless local Petrov-Galerkin method, The International Conference of Computational Methods April 4-6, 2007, Hiroshima
  36. F. Haji Aboutalebi, M. Farzin, M. Loh-Mousavi, Prediction of rupture in tube hydro-forming process using ductile damage, Proceedings of the 9th international conference on advanced technology of plasticity, Sept. 7-11, 2008/ Gyeonglu, Korea, pp 94-98.
  37. F. Haji Aboutalebi, M. Farzin, H. Khademyzadeh, “Damage evolution and Crack propagation in axial and biaxial tensile tests”, 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  38. M. Jandaghian, M. Farzin, بررسی اثر هندسه بیلت بر تست اکستروزن دوفنانی در محاسبه ضریب اصطکاک بین سطوح16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  39. M. Sohankar, M. Farzin , H. Abbasi, بهينه سازي شرايط اصطکاک در فرآيند شکلدهي لوله هاي جدار نازک به روش خم فشاري      16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  40. H. Dalayeli, M. Farzin, H. Hashemolhosseini, ارزیابی مشتقات متغیرهای میدان با استفاده از تقریب حداقل مجموع مربعات متحرک 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  41. H. Asadi, M. Farzin, بررسی شرایط شکل دهی فرآیند اسپینینگ لوله جدارضخیم و بهینه سازي فرآیند اسپینینگ لوله , 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  42. M. Khalilian, M. Bakhshi-Jooybari, M. Farzin,   تعيين زاويه بهينه در فرآيند اکستروژن ميلگرد به مقطع مربعي در قالب با پروفيل مخروطی, 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  43. F. Ahmadi, M. Farzin,   بررسی میزان برگشت فنری در لوله های خم شده به روش خمش القایی و مقایسه نتایج تئوری , 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  44. -F. Ahmadi, M. Farzin,   بررسی تاثیرپارامترهای هندسی و اصطکاک در بوجود امدن ترکهای جناغی در فرایند کشش سیم  , 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  45. N. Sharifian, M. Loh-Mousavi, M. Farzin, Finite element simulation of incremental forming of aluminum conical parts, 4th National conference of metals and materials forming, MATFORM87, Sharif Univ. of Technology, 3-4 Dec. 2008-Tehran, Iran.
  46. M. Zoei, M. Farzin, Finite element analysis of hot sheet gas forming, 4th National conference of metals and materials forming, MATFORM87, Sharif Univ. of Technology, 3-4 Dec. 2008-Tehran, Iran.
  47. M. Zoei, M. Farzin, A.H.mohammadi, Experimental investigation of temperature effect on aluminum alloy formability, Birjand International Congress on Manufacturing Technologies (ICME2009), to be published.
  48. M. Zoei, M. Farzin, Determination of required pressure in the hot metal gas forming process with finite element method, Birjand International Congress on Manufacturing Technologies (ICME2009), to be published.
  49. M. Zoei, M. Farzin, A. H. Mohammadi, Finite Element analysis and Experimental Investigation of Hot Al Alloy Sheet Forming Process by Gas, 17th annual (International) Conference on Mechanical Engineering, (ISME2009), Tehran University, Iran, to be published.
  50. M. Loh-Mousavi, M. Baghaei-pour, M. Farzin, Effects of material properties on improvement in the pulsating hydro-forming of tube in box shaped die, 4th National conference of metals and materials forming, MATFORM87, Sharif Univ. of Technology, 3-4 Dec. 2008-Tehran, Iran.
  51. H. Dalayeli , M. Farzin , H. Hashemolhosseini, metal forming analysis by a rigid plastic meshless colocation method- 8th International Conference of Technology of Plasticity, PP.677-678. 2005.10.9 to13.
  52. S.H. Dibajian,  M. Farzin, S.H. HashemAlhousainy, N.Fathianpour, “Modification of moving least square approximation by imposing essential boundary conditions using Kriging method”, International Conference on Computational Methods (ICCM2007), 2007.04.04-06
  53. M. Moradi, M. Farzin, H. Javani, “ Ductile simulation of punchless piercing process using Gurson and Lemaitre coupled damage models”, International Conference on Computational Methods (ICCM2007), 2007.04.04-06
  54. M. Sohankar, M. Farzin , H. Abbasi, Simulation and optimization of working conditions during push bending process, 15th Annual ( International ) Conference on Mechanical Engineering ( ISME 2007 ), 2007.05.17-15
  55. بررسي خصوصيات روانكاري و اصطكاكي در شكل دهي ورق هاي پوشش دار رنگي –رضا نصوحی- جواد زرکوب-  محمود فرزین, 2nd Tehran international congress on manufacturing engineering (TICME 2007), 2007.12.13-12
  56. محمد بخشی جویباری- محسن خلیلیان- -  -تعيين زاويه بهينه در فرآيند اكستروژن ميل گرد به مقطع مربعي با پروفيل قالب مخروطي- محمود فرزین   و مقايسه نتايج بدست امده با نتايج تجربي   كنفرانس ملي مهندسي ساخت و توليد - 1386.12.02-01 ايران_نجف آباد-
  57. M. Loh-Mousavi, K. Mori, M. Bakhshi Jouybari, M. Farzin, S.J. Hossinipour. “3-D Finite Element Simulation of Pulsating Free Bulge Hydroforming of Tubes”-   كنفرانس ملي مهندسي ساخت و توليد - 2008.02.20-21 ايران_نجف آباد-
  58.  محسن لوح موسوی- کن ایچیرو موری محمد بخشی جویباری محمود فرزین –سید جمال حسینی پور- تحليل تجربي و اجزاي محدود فرايند هيدروفرمينگ لوله با فشار نوساني در قالب جعبه اي شكل- كنفرانس ملي مهندسي ساخت و توليد- 1-2 اسفند-  1386- ايران_نجف آباد-        
  59. محسن توانایی-  محمود فرزین مرتضی- شمعانیان -منصور نجاتی-محسن امینی - مرتضی رمضانی- تحليل حرارتي و خستگي لوله هاي آبگرد انتقال تختال كوره هاي پيشگرم نورد گرم-

 سمپوزيوم فولاد  88- ايران_يزد- 1388.12.12-11-

  1. Incremental Sheet Metal Forming of Variable Thickness Sheet Metals and Comparison with Anothe by a Flat Ended and a Round Ended Tool- Flexible Automation and Intelligent Manufacturing ( FAIM2010 )- صفوي سيدمحسن- 2010.07.14-12
  2. وحید اشرفی-  محمود فرزین-17807  - طراحی یک سیستم جدید انتقال دو بعدی قطعات فلزی سبک وزن در زیر پرس - 16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.
  3.  A Nazemi, Khademizadeh, M. Farzin, H. Mousavi, ,بررسی و شبیه سازی یک تکنیک جدید در فرایند کشش عمیق اصطکاکی با استفاده از ورق گیر چند قسمتی  -

16th annual (International) Conference on Mechanical Engineering, (ISME2008), May13-15, 2008, Shahid Bahonar University of Kerman, Iran.

  1. محسن توانایی- مرتضی شمعانیان- محمود فرزین-محسن امینی-منصور نجاتی- مرتضی رمضانی بهینه سازی فرایندهای ساخت لوله های ابگرد انتقال تختال کورههای پیشگرم نورد گرم- همایش سالانه مهندسی مکانیک- 21-23 -اردیبهشت- 13889- دانشگاه صنعتی شریف 17844-  ISME2010
  2. 17864- M. Gandomkar,  H. Hashemolhosseini, M. Farzin, “A fully Explicit Point Collocation Meshless Method for Analyses of Elastp-Dynamic Problems, P131 Proceedings of  18th Annual  International Conference on Mechanical Engineering ( ISME 2010 ), 11-13 May 2010, Sharif University of Technology, Tehran, Iran.
  3. رضا جعفري ندوشن، محمود فرزين -مدلي ميكروساختار براي پيش بيني حفره زايي در شكلدهي سوپرپلاستيك آلياژ آلومينيوم -كنفرانس بین المللي مهندسی مکانیک و فن آوری های پیشرفته دانشگاه آزاد  واحد مجلسی 19-21 مهر 1391 اصفهان –ایران 26579
  4. R. Jafari Nedoushan and M. Farzin,  Strain rate and grain size dependency of Nano Crystalline Materials Behavior, International Congress on nonoscience and nanotechnology (ICNN2012), 8-10 September,  Kashan, Iran. 26580
  5. R. Jafari Nedoushan and M. Farzin, Tension compression asymmetry  in Nano Crystalline Materials, International Congress on nonoscience and nanotechnology (ICNN2012), 8-10 September,  Kashan, Iran. 26583
  6. R. Shahrokh, M. Farzin, H. Ebrahimi, A. Fallahi Arezoodar and A. Fadaii Tehrani, Numerical Solution of the Governing Equations for Electromagnetic Inward Tube Forming, 20th Annual International Conference on Mechanical Engineering-ISME2012, 16-18 May, 2012, School of Mechanical Eng., Shiraz University, Shiraz, Iran, 26586

تحت نظارت وف ایرانی